Recent content by ECD2

  1. E

    Help with removing duplicates in the BCD

    Somewhere along the way, I have inadvertently created too many entries in the section labeled "Firmware Application (101fffff)". This is making the loading of Windows very very slow. I have 365 items listed when there should normally be maybe 4-6 entries. How do I go about getting rid of the...
  2. E

    Too many duplicate entries in my NVRAM - System very slow to boot

    Somewhere along the way, I have inadvertently created too many entries in the section labeled "Firmware Application (101fffff)". I have 365 items listed when there should normally be maybe 4-6 entries. How do I go about getting rid of the duplicates? I know how to remove any duplicates in the...
  3. E

    Gettin the oxc ....001 error on dual boot

    I am very pleased to report that I have resolved the problem and now my dual boot works properly. As I mentioned above I was running the two drives off of different SATA controllers, one on the MB and one on a PCIe SATA expansion card. Since my PCIe SATA card has four ports and the MB only...
  4. E

    Suggestions for the next update of EasyBCD after 2.3

    Are there any plans to release an updated version of EasyBCD in the future? If so, here are my suggestions: 1. View Settings > Display Mode window: It would be nice for the software to remember the size of this window. Each time I open it, I have to resize it in order to see all of the items...
  5. E

    Gettin the oxc ....001 error on dual boot

    Thank you for the suggestions. I tried the File> Select store option and it appeared to open on the C: drive, although it might have opened at the lowest drive letter by default. Not knowing which, this was inconclusive. I did the File > LoadBCD, but no visible results. It looks like from my...
  6. E

    Gettin the oxc ....001 error on dual boot

    Here they are.
  7. E

    Gettin the oxc ....001 error on dual boot

    Oops! I rechecked what I thought I had found. I looked at the BCD again with my hex editor and found that it is looking to Volume 7, not Volume 5 when it first boots. It reads "Device\Harddisk Volume 7 \ boot\bcd" in the first few bytes of the BCD. I guess I am somewhat confused. I know the...
  8. E

    Gettin the oxc ....001 error on dual boot

    I have done some more research in trying to figure this out. It looks like that it is using Volume 5 to boot. No sure why the volumes are numbered the way they are. Here is a snapshot of the mapping: If this numbering sequence is not relevant to the booting problem, please let me know.
  9. E

    Gettin the oxc ....001 error on dual boot

    I deleted the Autocad entry in the menu and saved it. I added it again and saved it. I rebooted and still the same result. I presume that those steps delete c:\boot\bcd and create a new one? When I do a detail partition on C: and D: they both have the same type (xxxxxx} identifer. Is that a...
  10. E

    Gettin the oxc ....001 error on dual boot

    More Info: My drive 1 boot is now drive D: since I have moved a virtual drive to a higher letter. I am attaching a copy of the firmware in hopes that it provides additional detail that is helpful.
  11. E

    Gettin the oxc ....001 error on dual boot

    Yes, it is still showing as partition E:. I tried a bootrec /rebuildbcd and /scanos, but one of them said "the requested system device cannot be identified due to multiple indistinguishable devices potentially matching the identification criteria". I don't remember which one gave the error...
  12. E

    Gettin the oxc ....001 error on dual boot

    I am doing a UEFI dual boot of two Windows 7 versions on separate drives. It was all working fine until I had to re-partition one of the drives to move future Linux partitions to a separate disk drive from the Windows 7 drives. I have now taken care of the partitions and I have two drives that...
  13. E

    Multibooting two separately installed EFI Windows 7 drives

    Terry, thank you very much for the prompt reply. It worked perfectly - no issues. Thanks for the assistance.
  14. E

    Multibooting two separately installed EFI Windows 7 drives

    I am new to EasyBCD and new to multibooting, so please bear with my questions. I have two UEFI GPT installations of Windows7 on two separate disk drives. At the present time, I am unplugging one and plugging in the other to switch between the two systems. Can EasyBCD manage a multiboot for...