EasyBCD Didn't Work in This Case!!! HELP!!!

[cz48b1]

Hi all,

This is what I have.....

Disk #1 with WinXP, and after that, installed Win7 (dual boot).
Disk #2 with two empty partitions.

I created an image (using Acronis 2010) of the Win7 install and restored it on the firt partion on disk #2.

Didn't boot. I had to do a repair (two times). After that, disk #2 booted with Win7 without any problems.

Then I created a second (new) image of the working partition of disk #2.

Restored this image to disk #2 second partition, but it is not recognized by Windows 7 (no startup menu).

So I tried to use EasyBCD to create a new BCD entry but IT DIDN'T WORK.

The idea is to have the startup menu to choose between partion #1 (Win7) or partion #2 (Win7).

Any help would be great.

Thanks in advance!!!

See below output of "bcdedit /enull all" after EasyBCD:

Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=D:
path \bootmgr
description Windows Boot Manager
locale en-US
default {default}
displayorder {current}
{default}
timeout 30
displaybootmenu Yes
Windows Boot Loader
-------------------
identifier {default}
device partition=C:
path \Windows\system32\winload.exe
description Windows 7 Ultimate NEW
locale en-US
osdevice partition=C:
systemroot \Windows
sos No
debug No
Windows Boot Loader
-------------------
identifier {current}
device partition=D:
path \Windows\system32\winload.exe
description Windows 7 Ultimate Original
locale en-US
recoverysequence {ec036cd3-819b-11df-af50-968f3f197355}
recoveryenabled Yes
osdevice partition=D:
systemroot \Windows
resumeobject {8d808129-8172-11df-8427-806e6f6e6963}
Windows Boot Loader
-------------------
identifier {ec036cd3-819b-11df-af50-968f3f197355}
device ramdisk=[C:]\Recovery\97573ef7-d8a8-11de-8983-d426ffc6e778\Winre.wim,{ec036cd4-819b-11df-af50-968f3f197355}
path \windows\system32\winload.exe
description Windows Recovery Environment (recovered)
locale
osdevice ramdisk=[C:]\Recovery\97573ef7-d8a8-11de-8983-d426ffc6e778\Winre.wim,{ec036cd4-819b-11df-af50-968f3f197355}
systemroot \windows
winpe Yes
Resume from Hibernate
---------------------
identifier {8d808129-8172-11df-8427-806e6f6e6963}
device partition=D:
path \Windows\system32\winresume.exe
description Windows 7 Ultimate (recovered)
locale en-US
inherit {resumeloadersettings}
filedevice partition=C:
filepath \hiberfil.sys
pae Yes
debugoptionenabled No
Windows Memory Tester
---------------------
identifier {memdiag}
device partition=D:
path \boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
Device options
--------------
identifier {ec036cd4-819b-11df-af50-968f3f197355}
ramdisksdidevice partition=C:
ramdisksdipath \Recovery\97573ef7-d8a8-11de-8983-d426ffc6e778\boot.sdi

[Computer Guru]

EasyBCD 2.0 -> BCD Backup/Repair -> Reset BCD

Then add 2 new entries, one for drive C: and one for drive D: