cannot set Legacy boot menu

Status
Not open for further replies.

Drugi

Member
Hello Everyone,

I have Windows XP Pro (32 bit), 7 Pro (64 bit) and 10 Pro (64 bit) installed on the SDD. And I want to have bootloader to work in Legacy mode with Windows 10 as default system.

So I set the bootmenupolicy of the {current} entry (which is Windows 10) as "Legacy".

The problem is that every time I boot to Windows 10, shutdown and turn on the computer again, the bootloader runs in Metro mode... I have changed the displaybootmenu to "No", but there is no possitive effect...

What is the reason of this behavior and what to do, to fix this?

There is my print of bcdedit /enum command:

Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume1
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {current}
resumeobject {acfc7de5-031c-11e6-85e5-d4bed97b16e2}
displayorder {ntldr}
{a8a9e16a-fa19-11e5-b1b7-abcb5c53957d}
{current}
toolsdisplayorder {memdiag}
timeout 5
displaybootmenu No

Windows Legacy OS Loader
------------------------
identifier {ntldr}
device partition=\Device\HarddiskVolume1
path \ntldr
description Microsoft Windows XP Professional
custom:250000c2 0

Windows Boot Loader
-------------------
identifier {a8a9e16a-fa19-11e5-b1b7-abcb5c53957d}
device partition=\Device\HarddiskVolume2
path \Windows\system32\winload.exe
description Microsoft Windows 7 Professional (64 bit)
locale en-US
inherit {bootloadersettings}
recoverysequence {a8a9e16b-fa19-11e5-b1b7-abcb5c53957d}
recoveryenabled Yes
osdevice partition=\Device\HarddiskVolume2
systemroot \Windows
resumeobject {a8a9e169-fa19-11e5-b1b7-abcb5c53957d}
nx OptIn
bootmenupolicy Legacy
quietboot Yes

Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
description Microsoft Windows 10 Professional (64 bit)
locale en-us
inherit {bootloadersettings}
allowedinmemorysettings 0x15000075
osdevice partition=C:
systemroot \Windows
resumeobject {acfc7de5-031c-11e6-85e5-d4bed97b16e2}
nx OptIn
bootmenupolicy Legacy
 
Yes, after a few tests (restarts, shutdown and turn on) I think the reason was a secret hibernation... The computer is again a little bit more mine :wink:.

Thank you, Terry!

And making a secret of this shutdown/hibernation is absolutely ridiculous...

Drugi
 
It's all marketing hype.
"look how much faster we've made the boot ! - switch to W10 now and see for yourself"
Not a particular problem on a W10-only PC, but a complete pita when dual-booting.
 
Yes, I understand marketing point... But slogan "We have superfast boot (which use our super algorithm which is some kind of hibernation)" is unacceptable?
Maybe... Ok, most importantly is that my problem is solved...

Best regards,
Drugi
 
If you're having trouble setting up the Legacy Boot Menu on your computer, it could be due to various reasons, and the steps to access it may differ depending on your device's manufacturer and model. Here are general steps you can follow:

Accessing Legacy Boot Menu:​

1. Restart Your Computer:

  • Ensure that your computer is powered off, then turn it back on.

2. Access BIOS/UEFI:

  • During the initial boot process, you'll need to access the BIOS/UEFI settings. This is typically done by pressing a specific key or key combination. Common keys include:
    • For BIOS: Usually, it's the Del, Esc, F1, F2, or F10 key.
    • For UEFI: The key might be Esc, Del, or F2, depending on your device.

3. Navigate to Boot Options:

  • Once you are in the BIOS/UEFI settings, navigate to the "Boot" or "Boot Order" section using the arrow keys.

4. Enable Legacy Boot:

  • Look for an option related to boot mode, and change it to "Legacy" or "Legacy Support." This may involve toggling between UEFI and Legacy modes.

5. Set Boot Priority:

  • Adjust the boot priority order to ensure that the device you want to boot from first is at the top of the list.

6. Save Changes and Exit:

  • After making changes, save the settings and exit. This is usually done by navigating to the "Exit" menu and selecting "Save Changes and Exit."

7. Restart:

  • Allow your computer to restart with the changes you made.

Note:​

  • The steps may vary depending on your computer's manufacturer and model. Consult your device's manual or check the manufacturer's website for specific instructions.
  • Some systems might require you to disable Secure Boot when switching to Legacy mode.
  • Keep in mind that using Legacy Boot may not be recommended for modern systems, as UEFI is the newer standard.
 
Status
Not open for further replies.
Back
Top