EasyBCD 2.3 error CLR20r3 - bcdedit entries attached.

Hi,
I installed EasyBCD 2.3 on my Windows 8.1 because i wanted to add my ubuntu installed on other harddrive to boot manager.
I add it and everything worked perfectly. But when i tried to run EasyBCD next time to modify name of linux displaed in BootManager i received this error:
Problem Event Name: CLR20r3
Problem Signature 01: EasyBCD.exe
Problem Signature 02: 2.3.0.207
Problem Signature 03: 562643e9
Problem Signature 04: System.Xml
Problem Signature 05: 4.6.81.0
Problem Signature 06: 5584e6c7
Problem Signature 07: b79
Problem Signature 08: 27
Problem Signature 09: IOIBMURHYNRXKW0ZXKYRVFN0BOYYUFOW
OS Version: 6.3.9600.2.0.0.256.48
Locale ID: 1045
Additional Information 1: 887f
Additional Information 2: 887ffc43463999df22a025f9667d5247
Additional Information 3: c706
Additional Information 4: c7061b8d73c287318f86908321ca556a


I tried to use fixboot, fixmbr and rebuildbcd tools from command prompt but there is still the same error. i removed from bcd entry about linux (using bcdedit.exe tool) - problem is still. I reinstalled EasyBCD few times. Here is my BCD output:

command: bcdedit /enum ACTIVE /v

output:


Windows Boot Manager
--------------------
identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device partition=\Device\HarddiskVolume1
description Windows Boot Manager
locale en-US
inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e}
integrityservices Enable
default {9c80063e-5bfb-11e4-8485-f59ea54ad660}
resumeobject {9c80063d-5bfb-11e4-8485-f59ea54ad660}
displayorder {9c80063e-5bfb-11e4-8485-f59ea54ad660}
toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d}
timeout 30

Windows Boot Loader
-------------------
identifier {9c80063e-5bfb-11e4-8485-f59ea54ad660}
device partition=C:
path \Windows\system32\winload.exe
description Windows 8.1
locale en-US
loadoptions ENABLE_INTEGRITY_CHECKS
inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7}
recoverysequence {9c80063f-5bfb-11e4-8485-f59ea54ad660}
integrityservices Enable
recoveryenabled Yes
nointegritychecks Yes
testsigning No
allowedinmemorysettings 0x15000075
osdevice partition=C:
systemroot \Windows
resumeobject {9c80063d-5bfb-11e4-8485-f59ea54ad660}
nx OptIn
bootmenupolicy Standard

------------


Any idea how to fix it and run EasyBCD ?????

And here is my boograbber.exe output (My first ssd hard drive has only one partition C: (with WIndows 8.1), second one harddrive has E(other stuff) and L (with linux) partitions):

WARN: Unable to get volume information for \\?\Volume{e433a75a-9947-11e5-829b-80
6e6f6e6963}\
WARN: Unable to get volume information for \\?\Volume{e433a75b-9947-11e5-829b-80
6e6f6e6963}\
WARN: Unable to get volume information for \\?\Volume{e433a82c-9947-11e5-829b-cc
af78e4343a}\
WARN: No active partition detected on disk 1.
D0,2,2,0,128035676160,0
P1,,7,367001600,95805440,Yes,multi(0)disk(0)rdisk(0)partition(1),Yes,
P2,C:\,7,127666225152,7154429952,Yes,multi(0)disk(0)rdisk(0)partition(2),No,NTFS

D1,2,2,0,250059350016,1
P1,E:\,7,229085544448,186161709056,Yes,multi(0)disk(0)rdisk(1)partition(1),No,NT
FS
P2,L:\,131,20970000384,20970000384,Yes,multi(0)disk(0)rdisk(1)partition(2),No,
 
Last edited by a moderator:
You probably have a bad settings file. Check for a NeoSmart Technologies or EasyBCD folder in %appdata%\local and delete it (C:\Users\USERNAME\AppData\Local) then try launching EasyBCD again?
 
Hi, thanks for reply.
I restored my Windows using Windows Restore to point just before first installation of EasyBCD. And now after new installation it works.
 
Glad it works now. Hopefully the answer above will be of use to someone in the future!

Have a nice week!
 
Back
Top