Issue Adding Windows 7/XP

#1
I installed Windows XP after Windows 7 to a second partition, and now I can't add it using EasyBCD. I have included a log below of the bootgrabber tlist.

Code:
BootGrabber utility.
Copyright NeoSmart Technologies 2009-2010 <http://neosmart.net/>

Unable to get volume information for \\?\Volume{2d33283a-d2a7-11e4-bb5e-806e6f6e
6963}\
D0,2,2,1,1000204886016,0
P1,E:\,7,828298493952,579558223872,Yes,multi(0)disk(0)rdisk(0)partition(1),Yes,N
TFS
P0,,15,171784972800,0,Yes,,No,
P2,C:\,7,171784940544,163659653120,No,multi(0)disk(0)rdisk(0)partition(2),No,NTF
S
 

mqudsi

Mostly Harmless
Staff member
#2
Where is Windows installed?
 
#3
Windows is installed to my E: drive. I should have mentioned that, as XP changed my Windows 7 to E: and XP then took C:, and I can't change the letters when XP is running, and I'm completely new to this, and probably shouldn't have dual booted in the first place.
 
Last edited:

mqudsi

Mostly Harmless
Staff member
#4
I'm very much confused. Which OS can you boot into now? If you installed XP after 7, normally you'd only be able to boot into 7.

From the OS you're booted into with the bootgrabber output shown above, is E: XP?
What directory is Windows installed to on E:\?
 
#5
The OS that I'm booted into is XP, that is the bootgrabber output.

Windows 7 is installed directly to E:\Windows With all the program files, etc. in the root.
 

mqudsi

Mostly Harmless
Staff member
#6
OK, so you need to rewrite the MBR first to get your bootmgr back.