EasyBCD boots into Windows but not into Ubuntu

Kiesel

Member
Hi,

i just installed Win7 Prof and Kubuntu 11.10. I then used EasyBCD to set up the bootloader. While it is possible to boot into win7, i can not boot into Kubuntu.
My EasyBCD entries look like this:
Code:
Windows Boot Manager
--------------------
identifier              {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device                  partition=\Device\HarddiskVolume1
path                    \EFI\Microsoft\Boot\bootmgfw.efi
description             Windows Boot Manager
locale                  en-US
inherit                 {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e}
default                 {7c2ebadc-010d-11e1-ac18-9f2c36ab5c5b}
resumeobject            {7c2ebad6-010d-11e1-ac18-9f2c36ab5c5b}
displayorder            {7c2ebad7-010d-11e1-ac18-9f2c36ab5c5b}
                        {7c2ebada-010d-11e1-ac18-9f2c36ab5c5b}
                        {7c2ebadb-010d-11e1-ac18-9f2c36ab5c5b}
                        {7c2ebadc-010d-11e1-ac18-9f2c36ab5c5b}
toolsdisplayorder       {b2721d73-1db4-4c62-bf78-c548a880142d}
timeout                 30

Windows Boot Loader
-------------------
identifier              {7c2ebad7-010d-11e1-ac18-9f2c36ab5c5b}
device                  partition=C:
path                    \Windows\system32\winload.efi
description             Windows 7
locale                  en-US
inherit                 {6efb52bf-1766-41db-a6b3-0ee5eff72bd7}
recoverysequence        {7c2ebad8-010d-11e1-ac18-9f2c36ab5c5b}
recoveryenabled         Yes
osdevice                partition=C:
systemroot              \Windows
resumeobject            {7c2ebad6-010d-11e1-ac18-9f2c36ab5c5b}
nx                      OptIn

Real-mode Boot Sector
---------------------
identifier              {7c2ebada-010d-11e1-ac18-9f2c36ab5c5b}
device                  partition=C:
path                    \NST\nst_linux.mbr
description             NeoSmart Linux

Real-mode Boot Sector
---------------------
identifier              {7c2ebadb-010d-11e1-ac18-9f2c36ab5c5b}
device                  partition=C:
path                    \NST\AutoNeoGrub0.mbr
description             NeoSmart Linux

Real-mode Boot Sector
---------------------
identifier              {7c2ebadc-010d-11e1-ac18-9f2c36ab5c5b}
device                  partition=C:
path                    \NST\AutoNeoGrub1.mbr
description             Kubuntu

I tried to add the following entries: Grub, NeoGrub and Grub2. I always get the error "could not be loaded because it is missing or corrupt" with error code "0xc0000098".manager.jpg In the picture you can see how i parted my disk. D: is where my Ubuntu is located and it has installed grub2 to the same partition.

Could anybody tell me which entry i have to change and how?

Thanks, Kiesel

//edit:
I forgot to add some information about my system:
Code:
                 Boot Info Script 0.60    from 17 May 2011   ============================= Boot Info Summary: ===============================   => No boot loader is installed in the MBR of /dev/sda.  => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.  sda1: __________________________________________________________________________      File system:       vfat     Boot sector type:  Unknown     Boot sector info:   No errors found in the Boot Parameter Block.     Operating System:       Boot files:          sda2: __________________________________________________________________________      File system:            Boot sector type:  -     Boot sector info:       Mounting failed:   mount: unknown filesystem type ''  sda3: __________________________________________________________________________      File system:       ntfs     Boot sector type:  Windows Vista/7     Boot sector info:   No errors found in the Boot Parameter Block.     Boot file info:      Grub2 (v1.97-1.98) in the file /NST/nst_linux.mbr                         looks at sector 173063856 of the same hard drive for                         core.img. core.img is at this location and looks for                          on this drive.     Operating System:  Windows 7     Boot files:        /Windows/System32/winload.exe  sda4: __________________________________________________________________________      File system:       ext4     Boot sector type:  Grub2 (v1.99)     Boot sector info:   Grub2 (v1.99) is installed in the boot sector of sda4                         and looks at sector 173063856 of the same hard drive                         for core.img. core.img is at this location and looks                         for  on this drive.     Operating System:  Ubuntu 11.10     Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img  sda5: __________________________________________________________________________      File system:       ext4     Boot sector type:  -     Boot sector info:       Operating System:       Boot files:          sda6: __________________________________________________________________________      File system:       ntfs     Boot sector type:  Windows Vista/7     Boot sector info:   No errors found in the Boot Parameter Block.     Operating System:       Boot files:          sda7: __________________________________________________________________________      File system:            Boot sector type:  -     Boot sector info:       Mounting failed:   mount: unknown filesystem type '' mount: unknown filesystem type ''  sdb1: __________________________________________________________________________      File system:       vfat     Boot sector type:  SYSLINUX 4.04 2011-04-18     Boot sector info:   Syslinux looks at sector 1433896 of /dev/sdb1 for its                         second stage. SYSLINUX is installed in the F:\syslinux                         directory. No errors found in the Boot Parameter Block.     Operating System:       Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg /ldlinux.sys  ============================ Drive/Partition Info: =============================  Drive: sda _____________________________________________________________________  Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes  Partition  Boot  Start Sector    End Sector  # of Sectors  Id System  /dev/sda1                   1 1,250,263,727 1,250,263,727  ee GPT   GUID Partition Table detected.  Partition    Start Sector    End Sector  # of Sectors System /dev/sda1           2,048       206,847       204,800 EFI System partition /dev/sda2         206,848       468,991       262,144 Microsoft Reserved Partition (Windows) /dev/sda3         468,992   125,028,351   124,559,360 Data partition (Windows/Linux) /dev/sda4     125,028,352   176,316,415    51,288,064 Data partition (Windows/Linux) /dev/sda5     176,316,416   248,893,439    72,577,024 Data partition (Windows/Linux) /dev/sda6     248,893,440 1,237,155,839   988,262,400 Data partition (Windows/Linux) /dev/sda7   1,237,155,840 1,250,263,039    13,107,200 Swap partition (Linux)  Drive: sdb _____________________________________________________________________  Disk /dev/sdb: 1042 MB, 1042218496 bytes 19 heads, 27 sectors/track, 3967 cylinders, total 2035583 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes  Partition  Boot  Start Sector    End Sector  # of Sectors  Id System  /dev/sdb1    *             63     2,024,189     2,024,127   b W95 FAT32   "blkid" output: ________________________________________________________________  Device           UUID                                   TYPE       LABEL  /dev/loop0                                              squashfs    /dev/sda1        1236-28B5                              vfat        /dev/sda3        DCCC3CDBCC3CB21E                       ntfs        /dev/sda4        bac26f31-40c7-4e54-bdff-70c3c1a7a4aa   ext4        /dev/sda5        0cf869e0-924a-4f64-bef9-5c98edfc8d2e   ext4        /dev/sda6        0C0452677C51DFC9                       ntfs       daten /dev/sdb1        C042-7658                              vfat       MYLINUXLIVE  ================================ Mount points: =================================  Device           Mount_Point              Type       Options  /dev/loop0       /rofs                    squashfs   (ro,noatime) /dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)   =========================== sda4/boot/grub/grub.cfg: ===========================  -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub #  ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then   set have_grubenv=true   load_env fi set default="0" if [ "${prev_saved_entry}" ]; then   set saved_entry="${prev_saved_entry}"   save_env saved_entry   set prev_saved_entry=   save_env prev_saved_entry   set boot_once=true fi  function savedefault {   if [ -z "${boot_once}" ]; then     saved_entry="${chosen}"     save_env saved_entry   fi }  function recordfail {   set recordfail=1   if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi }  function load_video {   insmod vbe   insmod vga   insmod video_bochs   insmod video_cirrus }  insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root bac26f31-40c7-4e54-bdff-70c3c1a7a4aa if loadfont /usr/share/grub/unicode.pf2 ; then   set gfxmode=auto   load_video   insmod gfxterm   insmod part_gpt   insmod ext2   set root='(hd0,gpt4)'   search --no-floppy --fs-uuid --set=root bac26f31-40c7-4e54-bdff-70c3c1a7a4aa   set locale_dir=($root)/boot/grub/locale   set lang=sv_SE   insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then   set timeout=-1 else   set timeout=10 fi ### END /etc/grub.d/00_header ###  ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 0,71,115; then   clear fi ### END /etc/grub.d/05_debian_theme ###  ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then   if [ -e ${prefix}/gfxblacklist.txt ]; then     if hwmatch ${prefix}/gfxblacklist.txt 3; then       if [ ${match} = 0 ]; then         set linux_gfx_mode=keep       else         set linux_gfx_mode=text       fi     else       set linux_gfx_mode=text     fi   else     set linux_gfx_mode=keep   fi else   set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, med Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os { 	recordfail 	set gfxpayload=$linux_gfx_mode 	insmod gzio 	insmod part_gpt 	insmod ext2 	set root='(hd0,gpt4)' 	search --no-floppy --fs-uuid --set=root bac26f31-40c7-4e54-bdff-70c3c1a7a4aa 	linux	/boot/vmlinuz-3.0.0-12-generic root=UUID=bac26f31-40c7-4e54-bdff-70c3c1a7a4aa ro   quiet splash vt.handoff=7 	initrd	/boot/initrd.img-3.0.0-12-generic } menuentry 'Ubuntu, med Linux 3.0.0-12-generic (återställningsläge)' --class ubuntu --class gnu-linux --class gnu --class os { 	recordfail 	insmod gzio 	insmod part_gpt 	insmod ext2 	set root='(hd0,gpt4)' 	search --no-floppy --fs-uuid --set=root bac26f31-40c7-4e54-bdff-70c3c1a7a4aa 	echo	'Läser in Linux 3.0.0-12-generic ...' 	linux	/boot/vmlinuz-3.0.0-12-generic root=UUID=bac26f31-40c7-4e54-bdff-70c3c1a7a4aa ro recovery nomodeset  	echo	'Läser in initial ramdisk ...' 	initrd	/boot/initrd.img-3.0.0-12-generic } ### END /etc/grub.d/10_linux ###  ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ###  ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { 	insmod part_gpt 	insmod ext2 	set root='(hd0,gpt4)' 	search --no-floppy --fs-uuid --set=root bac26f31-40c7-4e54-bdff-70c3c1a7a4aa 	linux16	/boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { 	insmod part_gpt 	insmod ext2 	set root='(hd0,gpt4)' 	search --no-floppy --fs-uuid --set=root bac26f31-40c7-4e54-bdff-70c3c1a7a4aa 	linux16	/boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ###  ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then   if keystatus; then     if keystatus --shift; then       set timeout=-1     else       set timeout=0     fi   else     if sleep --interruptible 3 ; then       set timeout=0     fi   fi fi ### END /etc/grub.d/30_os-prober ###  ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries.  Simply type the # menu entries you want to add after this comment.  Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ###  ### BEGIN /etc/grub.d/41_custom ### if [ -f  $prefix/custom.cfg ]; then   source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### --------------------------------------------------------------------------------  =============================== sda4/etc/fstab: ================================  -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point>   <type>  <options>       <dump>  <pass> proc            /proc           proc    nodev,noexec,nosuid 0       0 # / was on /dev/sda4 during installation UUID=bac26f31-40c7-4e54-bdff-70c3c1a7a4aa /               ext4    errors=remount-ro 0       1 # /home was on /dev/sda5 during installation UUID=0cf869e0-924a-4f64-bef9-5c98edfc8d2e /home           ext4    defaults        0       2 # swap was on /dev/sda7 during installation #UUID=8ce95ac6-eb62-4ecb-b179-305c2c9c752c none            swap    sw              0       0 /dev/mapper/cryptswap1 none swap sw 0 0 --------------------------------------------------------------------------------  =================== sda4: Location of files loaded by Grub: ====================             GiB - GB             File                                 Fragment(s)    82.523303986 = 88.608722944   boot/grub/core.img                             1   63.792335510 = 68.496498688   boot/grub/grub.cfg                             1   61.972362518 = 66.542317568   boot/initrd.img-3.0.0-12-generic               1   63.786724091 = 68.490473472   boot/vmlinuz-3.0.0-12-generic                  1   61.972362518 = 66.542317568   initrd.img                                     1   63.786724091 = 68.490473472   vmlinuz                                        1  =========================== sdb1/boot/grub/grub.cfg: ===========================  --------------------------------------------------------------------------------  if loadfont /boot/grub/font.pf2 ; then 	set gfxmode=auto 	insmod efi_gop 	insmod efi_uga 	insmod gfxterm 	terminal_output gfxterm fi  set menu_color_normal=white/black set menu_color_highlight=black/light-gray  menuentry "Start Kubuntu" { 	set gfxpayload=keep 	linux	/casper/vmlinuz  file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- 	initrd	/casper/initrd.lz } menuentry "Check disc for defects" { 	set gfxpayload=keep 	linux	/casper/vmlinuz  boot=casper integrity-check quiet splash -- 	initrd	/casper/initrd.lz } --------------------------------------------------------------------------------  ========================= sdb1/syslinux/syslinux.cfg: ==========================  -------------------------------------------------------------------------------- # D-I config version 2.0 include menu.cfg default vesamenu.c32 prompt 0 timeout 300 ui gfxboot bootlogo --------------------------------------------------------------------------------  =================== sdb1: Location of files loaded by Grub: ====================             GiB - GB             File                                 Fragment(s)              ?? = ??             boot/grub/grub.cfg                             1  ================= sdb1: Location of files loaded by Syslinux: ==================             GiB - GB             File                                 Fragment(s)              ?? = ??             ldlinux.sys                                    1             ?? = ??             syslinux/chain.c32                             1             ?? = ??             syslinux/gfxboot.c32                           1             ?? = ??             syslinux/syslinux.cfg                          1             ?? = ??             syslinux/vesamenu.c32                          1  ============== sdb1: Version of COM32(R) files used by Syslinux: ===============   syslinux/chain.c32                 :  COM32R module (v4.xx)  syslinux/gfxboot.c32               :  COM32R module (v4.xx)  syslinux/vesamenu.c32              :  COM32R module (v4.xx)  ======================== Unknown MBRs/Boot Sectors/etc: ========================  Unknown BootLoader on sda1  00000000  eb 58 90 4d 53 44 4f 53  35 2e 30 00 02 02 fe 19  |.X.MSDOS5.0.....| 00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......| 00000020  00 20 03 00 01 03 00 00  00 00 00 00 02 00 00 00  |. ..............| 00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................| 00000040  80 00 29 b5 28 36 12 4e  4f 20 4e 41 4d 45 20 20  |..).(6.NO NAME  | 00000050  20 20 46 41 54 33 32 20  20 20 33 c9 8e d1 bc f4  |  FAT32   3.....| 00000060  7b 8e c1 8e d9 bd 00 7c  88 4e 02 8a 56 40 b4 41  |{......|.N..V@.A| 00000070  bb aa 55 cd 13 72 10 81  fb 55 aa 75 0a f6 c1 01  |..U..r...U.u....| 00000080  74 05 fe 46 02 eb 2d 8a  56 40 b4 08 cd 13 73 05  |t..F..-.V@....s.| 00000090  b9 ff ff 8a f1 66 0f b6  c6 40 66 0f b6 d1 80 e2  |.....f...@f.....| 000000a0  3f f7 e2 86 cd c0 ed 06  41 66 0f b7 c9 66 f7 e1  |?.......Af...f..| 000000b0  66 89 46 f8 83 7e 16 00  75 38 83 7e 2a 00 77 32  |f.F..~..u8.~*.w2| 000000c0  66 8b 46 1c 66 83 c0 0c  bb 00 80 b9 01 00 e8 2b  |f.F.f..........+| 000000d0  00 e9 2c 03 a0 fa 7d b4  7d 8b f0 ac 84 c0 74 17  |..,...}.}.....t.| 000000e0  3c ff 74 09 b4 0e bb 07  00 cd 10 eb ee a0 fb 7d  |<.t............}| 000000f0  eb e5 a0 f9 7d eb e0 98  cd 16 cd 19 66 60 80 7e  |....}.......f`.~| 00000100  02 00 0f 84 20 00 66 6a  00 66 50 06 53 66 68 10  |.... .fj.fP.Sfh.| 00000110  00 01 00 b4 42 8a 56 40  8b f4 cd 13 66 58 66 58  |....B.V@....fXfX| 00000120  66 58 66 58 eb 33 66 3b  46 f8 72 03 f9 eb 2a 66  |fXfX.3f;F.r...*f| 00000130  33 d2 66 0f b7 4e 18 66  f7 f1 fe c2 8a ca 66 8b  |3.f..N.f......f.| 00000140  d0 66 c1 ea 10 f7 76 1a  86 d6 8a 56 40 8a e8 c0  |.f....v....V@...| 00000150  e4 06 0a cc b8 01 02 cd  13 66 61 0f 82 75 ff 81  |.........fa..u..| 00000160  c3 00 02 66 40 49 75 94  c3 42 4f 4f 54 4d 47 52  |...f@Iu..BOOTMGR| 00000170  20 20 20 20 00 00 00 00  00 00 00 00 00 00 00 00  |    ............| 00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................| * 000001a0  00 00 00 00 00 00 00 00  00 00 00 00 0d 0a 52 65  |..............Re| 000001b0  6d 6f 76 65 20 64 69 73  6b 73 20 6f 72 20 6f 74  |move disks or ot| 000001c0  68 65 72 20 6d 65 64 69  61 2e ff 0d 0a 44 69 73  |her media....Dis| 000001d0  6b 20 65 72 72 6f 72 ff  0d 0a 50 72 65 73 73 20  |k error...Press | 000001e0  61 6e 79 20 6b 65 79 20  74 6f 20 72 65 73 74 61  |any key to resta| 000001f0  72 74 0d 0a 00 00 00 00  00 ac cb d8 00 00 55 aa  |rt............U.| 00000200   =============================== StdErr Messages: ===============================  unlzma: Decoder error
 
Last edited:
hmmm, seems like there was a format error and no i cant re edit it.<br>
Code:
<br><pre>                 Boot Info Script 0.60    from 17 May <span class="nv">2011</span>


<span class="o">=============================</span> Boot Info Summary: <span class="o">===============================</span>

 <span class="o">=</span>&gt; No boot loader is installed in the MBR of /dev/sda.
 <span class="o">=</span>&gt; Syslinux MBR <span class="o">(</span>4.04 and higher<span class="o">)</span> is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector <span class="nb">type</span>:  Unknown
    Boot sector info:   No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda2: __________________________________________________________________________

    File system:       
    Boot sector <span class="nb">type</span>:  -
    Boot sector info:  
    Mounting failed:   mount: unknown filesystem <span class="nb">type</span> <span class="s1">''</span>

sda3: __________________________________________________________________________

    File system:       ntfs
    Boot sector <span class="nb">type</span>:  Windows Vista/7
    Boot sector info:   No errors found in the Boot Parameter Block.
    Boot file info:      Grub2 <span class="o">(</span>v1.97-1.98<span class="o">)</span> in the file /NST/nst_linux.mbr 
                       looks at sector 173063856 of the same hard drive <span class="k">for </span>
<span class="k">                       </span>core.img. core.img is at this location and looks <span class="k">for  </span>
<span class="k">                       </span>on this drive.
    Operating System:  Windows 7
    Boot files:        /Windows/System32/winload.exe

sda4: __________________________________________________________________________

    File system:       ext4
    Boot sector <span class="nb">type</span>:  Grub2 <span class="o">(</span>v1.99<span class="o">)</span>
    Boot sector info:   Grub2 <span class="o">(</span>v1.99<span class="o">)</span> is installed in the boot sector of sda4 
                       and looks at sector 173063856 of the same hard drive 
                       <span class="k">for </span>core.img. core.img is at this location and looks 
                       <span class="k">for  </span>on this drive.
    Operating System:  Ubuntu 11.10
    Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector <span class="nb">type</span>:  -
    Boot sector info:  
    Operating System:  
    Boot files:        

sda6: __________________________________________________________________________

    File system:       ntfs
    Boot sector <span class="nb">type</span>:  Windows Vista/7
    Boot sector info:   No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda7: __________________________________________________________________________

    File system:       
    Boot sector <span class="nb">type</span>:  -
    Boot sector info:  
    Mounting failed:   mount: unknown filesystem <span class="nb">type</span> <span class="s1">''</span>
mount: unknown filesystem <span class="nb">type</span> <span class="s1">''</span>

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector <span class="nb">type</span>:  SYSLINUX 4.04 2011-04-18
    Boot sector info:   Syslinux looks at sector 1433896 of /dev/sdb1 <span class="k">for </span>its 
                       second stage. SYSLINUX is installed in the F:<span class="se">\s</span>yslinux 
                       directory. No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg /ldlinux.sys

<span class="o">============================</span> Drive/Partition Info: <span class="o">=============================</span>

Drive: sda _____________________________________________________________________

Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
<span class="nv">Units</span> <span class="o">=</span> sectors of 1 * <span class="nv">512</span> <span class="o">=</span> 512 bytes
Sector size <span class="o">(</span>logical/physical<span class="o">)</span>: 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  <span class="c"># of Sectors  Id System</span>

/dev/sda1                   1 1,250,263,727 1,250,263,727  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  <span class="c"># of Sectors System</span>
/dev/sda1           2,048       206,847       204,800 EFI System partition
/dev/sda2         206,848       468,991       262,144 Microsoft Reserved Partition <span class="o">(</span>Windows<span class="o">)</span>
/dev/sda3         468,992   125,028,351   124,559,360 Data partition <span class="o">(</span>Windows/Linux<span class="o">)</span>
/dev/sda4     125,028,352   176,316,415    51,288,064 Data partition <span class="o">(</span>Windows/Linux<span class="o">)</span>
/dev/sda5     176,316,416   248,893,439    72,577,024 Data partition <span class="o">(</span>Windows/Linux<span class="o">)</span>
/dev/sda6     248,893,440 1,237,155,839   988,262,400 Data partition <span class="o">(</span>Windows/Linux<span class="o">)</span>
/dev/sda7   1,237,155,840 1,250,263,039    13,107,200 Swap partition <span class="o">(</span>Linux<span class="o">)</span>

Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 1042 MB, 1042218496 bytes
19 heads, 27 sectors/track, 3967 cylinders, total 2035583 sectors
<span class="nv">Units</span> <span class="o">=</span> sectors of 1 * <span class="nv">512</span> <span class="o">=</span> 512 bytes
Sector size <span class="o">(</span>logical/physical<span class="o">)</span>: 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  <span class="c"># of Sectors  Id System</span>

/dev/sdb1    *             63     2,024,189     2,024,127   b W95 FAT32


<span class="s2">"blkid"</span> output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        1236-28B5                              vfat       
/dev/sda3        DCCC3CDBCC3CB21E                       ntfs       
/dev/sda4        bac26f31-40c7-4e54-bdff-70c3c1a7a4aa   ext4       
/dev/sda5        0cf869e0-924a-4f64-bef9-5c98edfc8d2e   ext4       
/dev/sda6        0C0452677C51DFC9                       ntfs       daten
/dev/sdb1        C042-7658                              vfat       <span class="nv">MYLINUXLIVE</span>

<span class="o">================================</span> Mount points: <span class="o">=================================</span>

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   <span class="o">(</span>ro,noatime<span class="o">)</span>
/dev/sdb1        /cdrom                   vfat       <span class="o">(</span>ro,noatime,fmask<span class="o">=</span>0022,dmask<span class="o">=</span>0022,codepage<span class="o">=</span>cp437,iocharset<span class="o">=</span>iso8859-1,shortname<span class="o">=</span>mixed,errors<span class="o">=</span>remount-ro<span class="o">)</span>


<span class="o">===========================</span> sda4/boot/grub/grub.cfg: <span class="o">===========================</span>

--------------------------------------------------------------------------------
<span class="c">#</span>
<span class="c"># DO NOT EDIT THIS FILE</span>
<span class="c">#</span>
<span class="c"># It is automatically generated by grub-mkconfig using templates</span>
<span class="c"># from /etc/grub.d and settings from /etc/default/grub</span>
<span class="c">#</span>

<span class="c">### BEGIN /etc/grub.d/00_header ###</span>
<span class="k">if</span> <span class="o">[</span> -s <span class="nv">$prefix</span>/grubenv <span class="o">]</span>; <span class="k">then</span>
<span class="k">  </span><span class="nb">set </span><span class="nv">have_grubenv</span><span class="o">=</span><span class="nb">true</span>
<span class="nb">  </span>load_env
<span class="k">fi</span>
<span class="nb">set </span><span class="nv">default</span><span class="o">=</span><span class="s2">"0"</span>
<span class="k">if</span> <span class="o">[</span> <span class="s2">"${prev_saved_entry}"</span> <span class="o">]</span>; <span class="k">then</span>
<span class="k">  </span><span class="nb">set </span><span class="nv">saved_entry</span><span class="o">=</span><span class="s2">"${prev_saved_entry}"</span>
  save_env saved_entry
  <span class="nb">set </span><span class="nv">prev_saved_entry</span><span class="o">=</span>
  save_env prev_saved_entry
  <span class="nb">set </span><span class="nv">boot_once</span><span class="o">=</span><span class="nb">true</span>
<span class="k">fi</span>

<span class="k">function </span>savedefault <span class="o">{</span>
  <span class="k">if</span> <span class="o">[</span> -z <span class="s2">"${boot_once}"</span> <span class="o">]</span>; <span class="k">then</span>
<span class="k">    </span><span class="nv">saved_entry</span><span class="o">=</span><span class="s2">"${chosen}"</span>
    save_env saved_entry
  <span class="k">fi</span>
<span class="o">}</span>

<span class="k">function </span>recordfail <span class="o">{</span>
  <span class="nb">set </span><span class="nv">recordfail</span><span class="o">=</span>1
  <span class="k">if</span> <span class="o">[</span> -n <span class="s2">"${have_grubenv}"</span> <span class="o">]</span>; <span class="k">then if</span> <span class="o">[</span> -z <span class="s2">"${boot_once}"</span> <span class="o">]</span>; <span class="k">then </span>save_env recordfail; <span class="k">fi</span>; <span class="k">fi</span>
<span class="o">}</span>

<span class="k">function </span>load_video <span class="o">{</span>
  insmod vbe
  insmod vga
  insmod video_bochs
  insmod video_cirrus
<span class="o">}</span>

insmod part_gpt
insmod ext2
<span class="nb">set </span><span class="nv">root</span><span class="o">=</span><span class="s1">'(hd0,gpt4)'</span>
search --no-floppy --fs-uuid --set<span class="o">=</span>root bac26f31-40c7-4e54-bdff-70c3c1a7a4aa
<span class="k">if </span>loadfont /usr/share/grub/unicode.pf2 ; <span class="k">then</span>
<span class="k">  </span><span class="nb">set </span><span class="nv">gfxmode</span><span class="o">=</span>auto
  load_video
  insmod gfxterm
  insmod part_gpt
  insmod ext2
  <span class="nb">set </span><span class="nv">root</span><span class="o">=</span><span class="s1">'(hd0,gpt4)'</span>
  search --no-floppy --fs-uuid --set<span class="o">=</span>root bac26f31-40c7-4e54-bdff-70c3c1a7a4aa
  <span class="nb">set </span><span class="nv">locale_dir</span><span class="o">=(</span><span class="nv">$root</span><span class="o">)</span>/boot/grub/locale
  <span class="nb">set </span><span class="nv">lang</span><span class="o">=</span>sv_SE
  insmod gettext
<span class="k">fi</span>
terminal_output gfxterm
<span class="k">if</span> <span class="o">[</span> <span class="s2">"${recordfail}"</span> <span class="o">=</span> 1 <span class="o">]</span>; <span class="k">then</span>
<span class="k">  </span><span class="nb">set </span><span class="nv">timeout</span><span class="o">=</span>-1
<span class="k">else</span>
<span class="k">  </span><span class="nb">set </span><span class="nv">timeout</span><span class="o">=</span>10
<span class="k">fi</span>
<span class="c">### END /etc/grub.d/00_header ###</span>

<span class="c">### BEGIN /etc/grub.d/05_debian_theme ###</span>
<span class="nb">set </span><span class="nv">menu_color_normal</span><span class="o">=</span>white/black
<span class="nb">set </span><span class="nv">menu_color_highlight</span><span class="o">=</span>black/light-gray
<span class="k">if </span>background_color 0,71,115; <span class="k">then</span>
<span class="k">  </span>clear
<span class="k">fi</span>
<span class="c">### END /etc/grub.d/05_debian_theme ###</span>

<span class="c">### BEGIN /etc/grub.d/10_linux ###</span>
<span class="k">if</span> <span class="o">[</span> <span class="k">${</span><span class="nv">recordfail</span><span class="k">}</span> !<span class="o">=</span> 1 <span class="o">]</span>; <span class="k">then</span>
<span class="k">  if</span> <span class="o">[</span> -e <span class="k">${</span><span class="nv">prefix</span><span class="k">}</span>/gfxblacklist.txt <span class="o">]</span>; <span class="k">then</span>
<span class="k">    if </span>hwmatch <span class="k">${</span><span class="nv">prefix</span><span class="k">}</span>/gfxblacklist.txt 3; <span class="k">then</span>
<span class="k">      if</span> <span class="o">[</span> <span class="k">${</span><span class="nv">match</span><span class="k">}</span> <span class="o">=</span> 0 <span class="o">]</span>; <span class="k">then</span>
<span class="k">        </span><span class="nb">set </span><span class="nv">linux_gfx_mode</span><span class="o">=</span>keep
      <span class="k">else</span>
<span class="k">        </span><span class="nb">set </span><span class="nv">linux_gfx_mode</span><span class="o">=</span>text
      <span class="k">fi</span>
<span class="k">    else</span>
<span class="k">      </span><span class="nb">set </span><span class="nv">linux_gfx_mode</span><span class="o">=</span>text
    <span class="k">fi</span>
<span class="k">  else</span>
<span class="k">    </span><span class="nb">set </span><span class="nv">linux_gfx_mode</span><span class="o">=</span>keep
  <span class="k">fi</span>
<span class="k">else</span>
<span class="k">  </span><span class="nb">set </span><span class="nv">linux_gfx_mode</span><span class="o">=</span>text
<span class="k">fi</span>
<span class="nb">export </span>linux_gfx_mode
<span class="k">if</span> <span class="o">[</span> <span class="s2">"$linux_gfx_mode"</span> !<span class="o">=</span> <span class="s2">"text"</span> <span class="o">]</span>; <span class="k">then </span>load_video; <span class="k">fi</span>
menuentry <span class="s1">'Ubuntu, med Linux 3.0.0-12-generic'</span> --class ubuntu --class gnu-linux --class gnu --class os <span class="o">{</span>
    recordfail
    <span class="nb">set </span><span class="nv">gfxpayload</span><span class="o">=</span><span class="nv">$linux_gfx_mode</span>
    insmod gzio
    insmod part_gpt
    insmod ext2
    <span class="nb">set </span><span class="nv">root</span><span class="o">=</span><span class="s1">'(hd0,gpt4)'</span>
    search --no-floppy --fs-uuid --set<span class="o">=</span>root bac26f31-40c7-4e54-bdff-70c3c1a7a4aa
    linux    /boot/vmlinuz-3.0.0-12-generic <span class="nv">root</span><span class="o">=</span><span class="nv">UUID</span><span class="o">=</span>bac26f31-40c7-4e54-bdff-70c3c1a7a4aa ro   quiet splash vt.handoff<span class="o">=</span>7
    initrd    /boot/initrd.img-3.0.0-12-generic
<span class="o">}</span>
menuentry <span class="s1">'Ubuntu, med Linux 3.0.0-12-generic (återställningsläge)'</span> --class ubuntu --class gnu-linux --class gnu --class os <span class="o">{</span>
    recordfail
    insmod gzio
    insmod part_gpt
    insmod ext2
    <span class="nb">set </span><span class="nv">root</span><span class="o">=</span><span class="s1">'(hd0,gpt4)'</span>
    search --no-floppy --fs-uuid --set<span class="o">=</span>root bac26f31-40c7-4e54-bdff-70c3c1a7a4aa
    <span class="nb">echo</span>    <span class="s1">'Läser in Linux 3.0.0-12-generic ...'</span>
    linux    /boot/vmlinuz-3.0.0-12-generic <span class="nv">root</span><span class="o">=</span><span class="nv">UUID</span><span class="o">=</span>bac26f31-40c7-4e54-bdff-70c3c1a7a4aa ro recovery nomodeset 
    <span class="nb">echo</span>    <span class="s1">'Läser in initial ramdisk ...'</span>
    initrd    /boot/initrd.img-3.0.0-12-generic
<span class="o">}</span>
<span class="c">### END /etc/grub.d/10_linux ###</span>

<span class="c">### BEGIN /etc/grub.d/20_linux_xen ###</span>
<span class="c">### END /etc/grub.d/20_linux_xen ###</span>

<span class="c">### BEGIN /etc/grub.d/20_memtest86+ ###</span>
menuentry <span class="s2">"Memory test (memtest86+)"</span> <span class="o">{</span>
    insmod part_gpt
    insmod ext2
    <span class="nb">set </span><span class="nv">root</span><span class="o">=</span><span class="s1">'(hd0,gpt4)'</span>
    search --no-floppy --fs-uuid --set<span class="o">=</span>root bac26f31-40c7-4e54-bdff-70c3c1a7a4aa
    linux16    /boot/memtest86+.bin
<span class="o">}</span>
menuentry <span class="s2">"Memory test (memtest86+, serial console 115200)"</span> <span class="o">{</span>
    insmod part_gpt
    insmod ext2
    <span class="nb">set </span><span class="nv">root</span><span class="o">=</span><span class="s1">'(hd0,gpt4)'</span>
    search --no-floppy --fs-uuid --set<span class="o">=</span>root bac26f31-40c7-4e54-bdff-70c3c1a7a4aa
    linux16    /boot/memtest86+.bin <span class="nv">console</span><span class="o">=</span>ttyS0,115200n8
<span class="o">}</span>
<span class="c">### END /etc/grub.d/20_memtest86+ ###</span>

<span class="c">### BEGIN /etc/grub.d/30_os-prober ###</span>
<span class="k">if</span> <span class="o">[</span> <span class="s2">"x${timeout}"</span> !<span class="o">=</span> <span class="s2">"x-1"</span> <span class="o">]</span>; <span class="k">then</span>
<span class="k">  if </span>keystatus; <span class="k">then</span>
<span class="k">    if </span>keystatus --shift; <span class="k">then</span>
<span class="k">      </span><span class="nb">set </span><span class="nv">timeout</span><span class="o">=</span>-1
    <span class="k">else</span>
<span class="k">      </span><span class="nb">set </span><span class="nv">timeout</span><span class="o">=</span>0
    <span class="k">fi</span>
<span class="k">  else</span>
<span class="k">    if </span>sleep --interruptible 3 ; <span class="k">then</span>
<span class="k">      </span><span class="nb">set </span><span class="nv">timeout</span><span class="o">=</span>0
    <span class="k">fi</span>
<span class="k">  fi</span>
<span class="k">fi</span>
<span class="c">### END /etc/grub.d/30_os-prober ###</span>

<span class="c">### BEGIN /etc/grub.d/40_custom ###</span>
<span class="c"># This file provides an easy way to add custom menu entries.  Simply type the</span>
<span class="c"># menu entries you want to add after this comment.  Be careful not to change</span>
<span class="c"># the 'exec tail' line above.</span>
<span class="c">### END /etc/grub.d/40_custom ###</span>

<span class="c">### BEGIN /etc/grub.d/41_custom ###</span>
<span class="k">if</span> <span class="o">[</span> -f  <span class="nv">$prefix</span>/custom.cfg <span class="o">]</span>; <span class="k">then</span>
<span class="k">  </span><span class="nb">source</span> <span class="nv">$prefix</span>/custom.cfg;
<span class="k">fi</span>
<span class="c">### END /etc/grub.d/41_custom ###</span>
--------------------------------------------------------------------------------

<span class="o">===============================</span> sda4/etc/fstab: <span class="o">================================</span>

--------------------------------------------------------------------------------
<span class="c"># /etc/fstab: static file system information.</span>
<span class="c">#</span>
<span class="c"># Use 'blkid' to print the universally unique identifier for a</span>
<span class="c"># device; this may be used with UUID= as a more robust way to name devices</span>
<span class="c"># that works even if disks are added and removed. See fstab(5).</span>
<span class="c">#</span>
<span class="c"># &lt;file system&gt; &lt;mount point&gt;   &lt;type&gt;  &lt;options&gt;       &lt;dump&gt;  &lt;pass&gt;</span>
proc            /proc           proc    nodev,noexec,nosuid 0       0
<span class="c"># / was on /dev/sda4 during installation</span>
<span class="nv">UUID</span><span class="o">=</span>bac26f31-40c7-4e54-bdff-70c3c1a7a4aa /               ext4    <span class="nv">errors</span><span class="o">=</span>remount-ro 0       1
<span class="c"># /home was on /dev/sda5 during installation</span>
<span class="nv">UUID</span><span class="o">=</span>0cf869e0-924a-4f64-bef9-5c98edfc8d2e /home           ext4    defaults        0       2
<span class="c"># swap was on /dev/sda7 during installation</span>
<span class="c">#UUID=8ce95ac6-eb62-4ecb-b179-305c2c9c752c none            swap    sw              0       0</span>
/dev/mapper/cryptswap1 none swap sw 0 0
--------------------------------------------------------------------------------

<span class="o">===================</span> sda4: Location of files loaded by Grub: <span class="o">====================</span>

           GiB - GB             File                                 Fragment<span class="o">(</span>s<span class="o">)</span>

  82.523303986 <span class="o">=</span> 88.608722944   boot/grub/core.img                             1
  63.792335510 <span class="o">=</span> 68.496498688   boot/grub/grub.cfg                             1
  61.972362518 <span class="o">=</span> 66.542317568   boot/initrd.img-3.0.0-12-generic               1
  63.786724091 <span class="o">=</span> 68.490473472   boot/vmlinuz-3.0.0-12-generic                  1
  61.972362518 <span class="o">=</span> 66.542317568   initrd.img                                     1
  63.786724091 <span class="o">=</span> 68.490473472   vmlinuz                                        <span class="nv">1</span>

<span class="o">===========================</span> sdb1/boot/grub/grub.cfg: <span class="o">===========================</span>

--------------------------------------------------------------------------------

<span class="k">if </span>loadfont /boot/grub/font.pf2 ; <span class="k">then</span>
<span class="k">    </span><span class="nb">set </span><span class="nv">gfxmode</span><span class="o">=</span>auto
    insmod efi_gop
    insmod efi_uga
    insmod gfxterm
    terminal_output gfxterm
<span class="k">fi</span>

<span class="nb">set </span><span class="nv">menu_color_normal</span><span class="o">=</span>white/black
<span class="nb">set </span><span class="nv">menu_color_highlight</span><span class="o">=</span>black/light-gray

menuentry <span class="s2">"Start Kubuntu"</span> <span class="o">{</span>
    <span class="nb">set </span><span class="nv">gfxpayload</span><span class="o">=</span>keep
    linux    /casper/vmlinuz  <span class="nv">file</span><span class="o">=</span>/cdrom/preseed/kubuntu.seed <span class="nv">boot</span><span class="o">=</span>casper maybe-ubiquity quiet splash --
    initrd    /casper/initrd.lz
<span class="o">}</span>
menuentry <span class="s2">"Check disc for defects"</span> <span class="o">{</span>
    <span class="nb">set </span><span class="nv">gfxpayload</span><span class="o">=</span>keep
    linux    /casper/vmlinuz  <span class="nv">boot</span><span class="o">=</span>casper integrity-check quiet splash --
    initrd    /casper/initrd.lz
<span class="o">}</span>
--------------------------------------------------------------------------------

<span class="o">=========================</span> sdb1/syslinux/syslinux.cfg: <span class="o">==========================</span>

--------------------------------------------------------------------------------
<span class="c"># D-I config version 2.0</span>
include menu.cfg
default vesamenu.c32
prompt 0
timeout 300
ui gfxboot bootlogo
--------------------------------------------------------------------------------

<span class="o">===================</span> sdb1: Location of files loaded by Grub: <span class="o">====================</span>

           GiB - GB             File                                 Fragment<span class="o">(</span>s<span class="o">)</span>

            ?? <span class="o">=</span> ??             boot/grub/grub.cfg                             <span class="nv">1</span>

<span class="o">=================</span> sdb1: Location of files loaded by Syslinux: <span class="o">==================</span>

           GiB - GB             File                                 Fragment<span class="o">(</span>s<span class="o">)</span>

            ?? <span class="o">=</span> ??             ldlinux.sys                                    1
            ?? <span class="o">=</span> ??             syslinux/chain.c32                             1
            ?? <span class="o">=</span> ??             syslinux/gfxboot.c32                           1
            ?? <span class="o">=</span> ??             syslinux/syslinux.cfg                          1
            ?? <span class="o">=</span> ??             syslinux/vesamenu.c32                          <span class="nv">1</span>

<span class="o">==============</span> sdb1: Version of COM32<span class="o">(</span>R<span class="o">)</span> files used by Syslinux: <span class="o">===============</span>

 syslinux/chain.c32                 :  COM32R module <span class="o">(</span>v4.xx<span class="o">)</span>
 syslinux/gfxboot.c32               :  COM32R module <span class="o">(</span>v4.xx<span class="o">)</span>
 syslinux/vesamenu.c32              :  COM32R module <span class="o">(</span>v4.xx<span class="o">)</span>

<span class="o">========================</span> Unknown MBRs/Boot Sectors/etc: <span class="o">========================</span>

Unknown BootLoader on sda1

00000000  eb 58 90 4d 53 44 4f 53  35 2e 30 00 02 02 fe 19  |.X.MSDOS5.0.....|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 20 03 00 01 03 00 00  00 00 00 00 02 00 00 00  |. ..............|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 00 29 b5 28 36 12 4e  4f 20 4e 41 4d 45 20 20  |..<span class="o">)</span>.<span class="o">(</span>6.NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 33 c9 8e d1 bc f4  |  FAT32   3.....|
00000060  7b 8e c1 8e d9 bd 00 7c  88 4e 02 8a 56 40 b4 41  |<span class="o">{</span>......|.N..V@.A|
00000070  bb aa 55 <span class="nb">cd </span>13 72 10 81  fb 55 aa 75 0a f6 c1 01  |..U..r...U.u....|
00000080  74 05 fe 46 02 eb 2d 8a  56 40 b4 08 <span class="nb">cd </span>13 73 05  |t..F..-.V@....s.|
00000090  b9 ff ff 8a f1 66 0f b6  c6 40 66 0f b6 d1 80 e2  |.....f...@f.....|
000000a0  3f f7 e2 86 <span class="nb">cd </span>c0 ed 06  41 66 0f b7 c9 66 f7 e1  |?.......Af...f..|
000000b0  66 89 46 f8 83 7e 16 00  75 38 83 7e 2a 00 77 32  |f.F..~..u8.~*.w2|
000000c0  66 8b 46 1c 66 83 c0 0c  bb 00 80 b9 01 00 e8 2b  |f.F.f..........+|
000000d0  00 e9 2c 03 a0 fa 7d b4  7d 8b f0 ac 84 c0 74 17  |..,...<span class="o">}</span>.<span class="o">}</span>.....t.|
000000e0  3c ff 74 09 b4 0e bb 07  00 <span class="nb">cd </span>10 eb ee a0 fb 7d  |&lt;.t............<span class="o">}</span>|
000000f0  eb e5 a0 f9 7d eb e0 98  <span class="nb">cd </span>16 <span class="nb">cd </span>19 66 60 80 7e  |....<span class="o">}</span>.......f<span class="sb">`</span>.~|
00000100  02 00 0f 84 20 00 66 6a  00 66 50 06 53 66 68 10  |.... .fj.fP.Sfh.|
00000110  00 01 00 b4 42 8a 56 40  8b f4 <span class="nb">cd </span>13 66 58 66 58  |....B.V@....fXfX|
00000120  66 58 66 58 eb 33 66 3b  46 f8 72 03 f9 eb 2a 66  |fXfX.3f;F.r...*f|
00000130  33 d2 66 0f b7 4e 18 66  f7 f1 fe c2 8a ca 66 8b  |3.f..N.f......f.|
00000140  d0 66 c1 ea 10 f7 76 1a  86 d6 8a 56 40 8a e8 c0  |.f....v....V@...|
00000150  e4 06 0a cc b8 01 02 <span class="nb">cd  </span>13 66 61 0f 82 75 ff 81  |.........fa..u..|
00000160  c3 00 02 66 40 49 75 94  c3 42 4f 4f 54 4d 47 52  |...f@Iu..BOOTMGR|
00000170  20 20 20 20 00 00 00 00  00 00 00 00 00 00 00 00  |    ............|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 0d 0a 52 65  |..............Re|
000001b0  6d 6f 76 65 20 64 69 73  6b 73 20 6f 72 20 6f 74  |move disks or ot|
000001c0  68 65 72 20 6d 65 64 69  61 2e ff 0d 0a 44 69 73  |her media....Dis|
000001d0  6b 20 65 72 72 6f 72 ff  0d 0a 50 72 65 73 73 20  |k error...Press |
000001e0  61 6e 79 20 6b 65 79 20  74 6f 20 72 65 73 74 61  |any key to resta|
000001f0  72 74 0d 0a 00 00 00 00  00 ac cb d8 00 00 55 aa  |rt............U.|
<span class="nv">00000200</span>


<span class="o">===============================</span> StdErr Messages: <span class="o">===============================</span>

unlzma: Decoder error
</pre><br>
 
Back
Top