I d/led Comodo Rescue Disc which utilizes SliTaz GNU/Linux for LIve CD
Everytime I reboot with CD in drive it boots up and goes through the process.
then it says something like : Switching to NoHz Mode
then ACPI Exception : AE_NOT_FOUND
then ACPI No dock devices found
then ACPI : PCI Interrupt Link
then complete Total LOCKUP with GREEN SCREEN :
vgaarb : device added PCI:0000:01:00.0,olddecodes=io+mem,decodes=none
wns=none
My system is :
MS Windows 7 Home Premium 64-bit SP1
Specification AMD Phenom(tm) 9850 Quad-Core Processor
HP LP2465 (1920x1200[at]59Hz)
2048MB GeForce GT 520 (XFX Pine Group)
Version 4.2.0
Vendor NVIDIA Corporation
Renderer GeForce GT 520/PCI/SSE2
possible video collision driver issue ?
Regards,
Crown
Addendum
Attempt running through Xboot / QEMU
TEXT MODE :
oRCU-based detection of stalled CPUs is disabled.
NR_IRQS:512
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration failed
TSC: Unable to calibrate against PIT
TSC: using PMTIMER reference calibration
Detected 2511.589 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency..
502317 BogoMIPS (lpj=2511589)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Performance Events: Broken PMU hardware detected, software events only.
Checking for popad bug...OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 32k freed
ACPI: Core revision 20101013
Enabing APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
....(found apic 0 pin 2) ...
........ failed.
...trying to set up timer as Virtual Wire IRQ ...
Everytime I reboot with CD in drive it boots up and goes through the process.
then it says something like : Switching to NoHz Mode
then ACPI Exception : AE_NOT_FOUND
then ACPI No dock devices found
then ACPI : PCI Interrupt Link
then complete Total LOCKUP with GREEN SCREEN :
vgaarb : device added PCI:0000:01:00.0,olddecodes=io+mem,decodes=none
wns=noneMy system is :
MS Windows 7 Home Premium 64-bit SP1
Specification AMD Phenom(tm) 9850 Quad-Core Processor
HP LP2465 (1920x1200[at]59Hz)
2048MB GeForce GT 520 (XFX Pine Group)
Version 4.2.0
Vendor NVIDIA Corporation
Renderer GeForce GT 520/PCI/SSE2
possible video collision driver issue ?
Regards,
Crown
Addendum
I d/led Comodo Rescue Disc which utilizes SliTaz GNU/Linux for LIve CD
Everytime I reboot with CD in drive it boots up and goes through the process.
then it says something like : Switching to NoHz Mode
then ACPI Exception : AE_NOT_FOUND
then ACPI No dock devices found
then ACPI : PCI Interrupt Link
then complete Total LOCKUP with GREEN SCREEN :
vgaarb : device added PCI:0000:01:00.0,olddecodes=io+mem,decodes=none
My system is :
MS Windows 7 Home Premium 64-bit SP1
Specification AMD Phenom(tm) 9850 Quad-Core Processor
HP LP2465 (1920x1200[at]59Hz)
2048MB GeForce GT 520 (XFX Pine Group)
Version 4.2.0
Vendor NVIDIA Corporation
Renderer GeForce GT 520/PCI/SSE2
possible video collision driver issue ?
Regards,
Crown
Attempt running through Xboot / QEMU
TEXT MODE :
oRCU-based detection of stalled CPUs is disabled.
NR_IRQS:512
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration failed
TSC: Unable to calibrate against PIT
TSC: using PMTIMER reference calibration
Detected 2511.589 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency..
502317 BogoMIPS (lpj=2511589)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Performance Events: Broken PMU hardware detected, software events only.
Checking for popad bug...OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 32k freed
ACPI: Core revision 20101013
Enabing APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
....(found apic 0 pin 2) ...
........ failed.
...trying to set up timer as Virtual Wire IRQ ...
