I have used v2.1 previously with no problem to dual boot XP and W7. Today I reloaded my system with 2 full wipe of the HD and installed 2 partitions each with W7 (produciton and test). They worked. WHen I used V2.1 to clean up the entry names I found there were none ! After some time I decided to install V2.2. It "sees" EFI DVD/CDROM, OsLoadser000, and 2 W7s. The time between post and op sys selction is about 10 seconds ! They both work, but something is screwy.

I need the machine to boot without delay. Any suggestions?

There are a total of 4 entries listed in the bootloader.
Default: Windows 7
Timeout: 3 seconds
EasyBCD Boot Device: C:\
Entry #1
BCD ID: {4c39cef0-d0bf-11e2-ba9f-806e6f6e6963}
Device: Unknown
Bootloader Path:
Entry #2
Name: OsLoader0000
BCD ID: {4c39cef1-d0bf-11e2-ba9f-806e6f6e6963}
Device: \Device\HarddiskVolume1
Bootloader Path: \EFI\BOOT\BOOTX64.EFI
Entry #3
Name: Windows 7
BCD ID: {current}
Drive: C:\
Bootloader Path: \Windows\system32\winload.efi
Entry #4
Name: 7 of 9
BCD ID: {482fbac6-cf44-11e2-b6b0-9ae0ddbf12e7}
Drive: F:\
Bootloader Path: \Windows\system32\winload.efi