[Help]Message [EMS activated]

#1
Hi everybody.
Message [EMS activated] appears after booting on a double boot.(on 2 industrial Computer)
This message dosn't appear when using Easy bcd editor.
It doesn't cause malfunction when using windows7 but HOW to remove this message.

Computer seems to detect a hardware device error on a power up and windows7 create a this addons message but start and run without problems after at least.
No changing using restore point.
I suspect motherboard.

It takes my head spin:evil:

Do you have ideas to solve this problem.
 

mqudsi

Mostly Harmless
Staff member
#2
You can reset the BCD by following these instructions: Resetting the BCD

Then add a new entry for your Windows 7. (under no uncertain terms should you reset then close EasyBCD before creating the new entry!)