$\"0x0000007E\"$ <\/p>\n

The 0x0000007E error<\/p>\n<\/div>\n

A blue screen error with the code as “0x0000007E” (SYSTEM_THREAD_EXCEPTION_NOT_HANDLED) can be caused by any of the following:<\/p>\n

Insufficient hard disk space<\/li>\n

Your BIOS might be incompatible with Windows XP<\/li>\n

The video adapter driver isn’t compatible with Windows XP<\/li>\n

The device drive is misconfigured or damaged<\/li>\n

Issues with the “Win32k.sys” file<\/li>\n<\/ul>\n
Try these tips to fix this error:<\/p>\n
\n
Make sure you have enough hard disk space. It’s very common for the 0x0000007E error to appear because of insufficient space on the disk.<\/li>\n
Try updating your BIOS software. Contact or search your computer manufacturer’s website on how to update BIOS.<\/li>\n
Temporarily remove any drivers you recently installed. Remove any unsigned drivers (not digitally signed by Microsoft) if the cause isn’t any of the recently installed drivers.<\/li>\n<\/ul>\n
0x0000008E (KERNEL MODE EXCEPTION NOT HANDLED)<\/h2>\n
The blue screen error with “0x0000008E” as the error code and “KERNEL_MODE_EXCEPTION_NOT_HANDLED” as the error name (not necessarily displayed) can be caused by a RAM memory module that is faulty or incompatible with Windows XP.<\/p>\n
$\"0x0000008E\"$ <\/p>\n
To fix this error, try these methods:<\/p>\n
Method #1: Remove new RAM modules<\/strong><\/p>\n
Remove any RAM modules you’ve recently added to your system. Then, restart your computer and try again.<\/p>\n
Method #2: Uninstall new software or drivers<\/strong><\/p>\n
If 0x0000008E appeared after installing a new piece of software or a device driver, try removing the software and restart your system to see if the error disappears.<\/p>\n
Method #3: Update BIOS<\/strong><\/p>\n
Search on your computer manufacturer’s website on how to update your BIOS.<\/p>\n
0x00000050 (PAGE FAULT IN NONPAGE AREA)<\/h2>\n
The blue screen error with the code “0x00000050” (PAGE_FAULT_IN_NONPAGED_AREA) can be caused by corrupted data on the hard disk, incompatibility of the installed display adapter drivers with Windows XP, or other causes.<\/p>\n
$\"The$ <\/p>\n
To repair your computer from this error, try the following fixes:<\/p>\n
Fix #1: Boot into the Last Known Good Configuration mode<\/strong><\/p>\n
The Last Known Good Configuration mode can solve issues caused by an incorrect or misconfigured driver. To boot into this mode, follow these steps:<\/p>\n
\n
Restart your computer<\/li>\n
Press F8<\/kbd> repeatedly before the Windows XP logo appears<\/li>\n
Choose “Last Known Good Configuration (Advanced)” from the boot options menu<\/li>\n
Press Enter<\/kbd><\/li>\n<\/ol>\nFix #2: Remove any new installed software or drivers<\/strong><\/p>\n If the error showed up after you installed a new software or a device driver, remove it from your system and try again.<\/p>\n Fix #3: Check the hard disk cables<\/strong><\/p>\n Make sure all your hard disk cables are connected properly.<\/p>\n 0x000000D1 (DRIVER IRQL NOT LESS THAN OR EQUAL TO)<\/h2>\nThe blue screen error with the code “0x000000D1” and name as “DRIVER_IRQL_NOT_LESS_THAN_OR_EQUAL_TO” can be caused by a faulty driver.<\/p>\n <\/p>\n Microsoft released an update for Windows XP Service Pack 2 (SP2) users that have the 0x000000D1 error:<\/p>\n Download update #KB916595<\/a><\/p>\n Follow the instructions from the “Install Instructions” section on how to install the update.<\/p>\n If #KB916595 doesn’t fix the error, try uninstalling any new device drivers you may recently installed on your system.<\/p>\n 0xC0000218<\/h2>\nThe blue screen error with the code “0xC0000218” (sometimes with these names displayed along: STATUS_CANNOT_LOAD_REGISTRY_FILE, UNKNOWN_HARD_ERROR, {Registry File Failure}) is caused by a misconfigured registry (a registry hive file can’t be loaded properly).<\/p>\n A hive is a group of keys (and subkeys) and values in the registry.<\/p>\n <\/p>\n You can fix the 0xC0000218 error by trying any of the following methods covered below:<\/p>\n Method #1: Run the chkdsk \/p command<\/strong><\/p>\n You need your original installation CD for this procedure. When you have the CD ready, follow these steps:<\/p>\n\nInsert the CD<\/li>\n Boot into the CD<\/li>\n Press R<\/kbd> for Recovery Console<\/li>\n Type in the administrator password<\/li>\n Hit Enter<\/kbd><\/li>\nType the following command in Command Prompt:\nchkdsk \/p<\/pre>\n<\/li>\nPress Enter<\/kbd><\/li>\nRestart<\/li>\n<\/ol>\nMethod #2: Boot to the Last Known Good Configuration<\/strong><\/p>\n You can boot into Windows XP’s Last Known Good Configuration mode by doing these steps:<\/p>\n\nRestart your computer<\/li>\n Press F8<\/kbd> repeatedly before the Windows XP logo appears<\/li>\n Choose “Last Known Good Configuration (Advanced)”<\/li>\nPress Enter<\/kbd><\/li>\n<\/ol>\nMethod #3: Recover the registry<\/strong><\/p>\nFollow the instructions from the Windows could not start: CONFIG\\SYSTEM error guide<\/a> on how to recover the registry of a Windows XP system.<\/p>\n 0x000000EA (THREAD STUCK IN DEVICE DRIVER)<\/h2>\nThe blue screen error with the code “0x000000EA” and the name “THREAD_STUCK_IN_DEVICE_DRIVER” that a video card driver (most likely) is stuck in a loop.<\/p>\n <\/p>\n To fix this error, try any of the following fixes.<\/p>\n Fix #1: Install the latest driver<\/strong><\/p>\n Make sure your video adapter has the latest driver available installed. If it’s not, remove the current driver, restart your computer, install the latest driver available from the manufacturer’s website and then restart your computer again.<\/p>\n Fix #2: Adjust Hardware Acceleration<\/strong><\/p>\n To adjust the acceleration, follow these steps:<\/p>\n\nClick Start<\/li>\n Click Control Panel<\/li>\n Click Display<\/li>\n At the Settings tab, click Advanced and then click on the Troubleshoot tab<\/li>\n Move the Hardware Acceleration slider to None<\/li>\n Click the Enable write combining option to make it unchecked<\/li>\n Click OK<\/li>\nClick OK again<\/li>\n<\/ol>\nMore Information<\/h2>\nLinked Entries<\/h3>\n\nchkdsk<\/a><\/li>\n<\/ul>\nSupport Links<\/h3>\n\nEasy Recovery Essentials for Windows<\/a> – our repair and recovery disk.<\/strong> \n \nIt’s an easy-to-use and automated diagnostics disk. It’s available for Windows 8<\/a>, Windows 7<\/a> and Windows Vista<\/a>. It’s also available for Windows XP and Windows Server.<\/p>\nRead more at Windows Recovery Disks<\/a>.\n<\/li>\n The NeoSmart Support Forums<\/a>, member-to-member technical support and troubleshooting.<\/li>\n Get a discounted price on replacement setup and installation discs: Windows XP<\/a>.<\/li>\n<\/ul>\nApplicable Systems<\/h3>\nThis Windows-related knowledgebase article applies to the following operating systems:<\/p>\n \nWindows XP (all editions)<\/li>\n<\/ul>\n","protected":false},"excerpt":{"rendered":"This guide shows you how to fix blue screen of death errors (or BSoD errors) for Windows XP. If you see a blue screen error, but Windows XP restarts immediately and you can’t read the error text, follow these instructions to disable the Automatically restart option: Right-click on My Computer Go to Properties Go to […]<\/p>\n","protected":false},"author":508,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"class_list":["post-2900","post","type-post","status-publish","format-standard","hentry"],"aioseo_notices":[],"jetpack_featured_media_url":"","jetpack_shortlink":"https:\/\/wp.me\/p3SlTq-KM","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/neosmart.net\/wiki\/wp-json\/wp\/v2\/posts\/2900","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/neosmart.net\/wiki\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/neosmart.net\/wiki\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/neosmart.net\/wiki\/wp-json\/wp\/v2\/users\/508"}],"replies":[{"embeddable":true,"href":"https:\/\/neosmart.net\/wiki\/wp-json\/wp\/v2\/comments?post=2900"}],"version-history":[{"count":6,"href":"https:\/\/neosmart.net\/wiki\/wp-json\/wp\/v2\/posts\/2900\/revisions"}],"predecessor-version":[{"id":5613,"href":"https:\/\/neosmart.net\/wiki\/wp-json\/wp\/v2\/posts\/2900\/revisions\/5613"}],"wp:attachment":[{"href":"https:\/\/neosmart.net\/wiki\/wp-json\/wp\/v2\/media?parent=2900"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}

0x0000007E (SYSTEM THREAD EXCEPTION NOT HANDLED)<\/h2>\n<\/p>\nThe 0x0000007E error<\/p>\n<\/div>\nA blue screen error with the code as “0x0000007E” (SYSTEM_THREAD_EXCEPTION_NOT_HANDLED) can be caused by any of the following:<\/p>\n

More Information<\/h2>\n