After swich two 2nd system, the boot menu won't show until repair with EaseBCD

Kendesigns

New Member
Please help me if someson know how to slove this.

I just bought an new desktop with two M2.SSD with two Win 11 on each, if I keep using the 1st Win11, no matter reboot or power off/on, I still able to select system with boot menu, but once I switch to 2nd Win11, no matter reboot or power off/on, it will directly boot with 2nd Win11.

I need to run EasyBCD and repair boot files to get the boot menu show again, does anyone know how to slove it?

Thanks a lot.
 
Hello,
Your issue likely stems from boot configuration conflicts between the two M.2 SSDs. When switching to the second Windows 11, it may override the boot priority. Try these steps:
  1. Check BIOS settings – Ensure both SSDs are detected and adjust the boot order.
  2. Rebuild the Boot Configuration Data (BCD) using EasyBCD or bcdboot commands.
  3. Use Windows Recovery – Boot into recovery mode and run bootrec /rebuildbcd.

For more details, check this discussion. Hope this helps!

Best Regards,
James Batson
 
Back
Top