PopOS and Windows 10

[foleyt]

I installed POP OS before I installed WIndows 10 PRO on two separate NVME drives (UEFI). My pop os install is not currently bootable but my Windows 10 still boots. If I remove the POP OS NVME drive from the system, Windows 10 won't boot. Windows 10 only has 1 partition with everything on it (Boot, Page File, Crash Dump, Basic Data Partition).

How do I get my Windows 10 Pro to boot normally without the POP OS NVME drive in the system.

Can EASY BCD fix this or do I need to buy EasyRE? Any help would be GREATLY appreciated.

Disk Management Lists the Windows Drive as Disk 5
The Pop OS drive is listed as Disk 7, the partitions are "EFI 500MB, Fat32 4GB, 932 GB Healthy Primary Partition, 4GB Healthy Primary Partition)



Windows Boot Manager
--------------------
identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device partition=\Device\HarddiskVolume5
path \EFI\MICROSOFT\BOOT\BOOTMGFW.EFI
description Windows Boot Manager
locale en-US
inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e}
default {b376ff9a-155a-11ed-ab3e-e338aefb2ad9}
resumeobject {b376ff99-155a-11ed-ab3e-e338aefb2ad9}
displayorder {b376ff9a-155a-11ed-ab3e-e338aefb2ad9}
toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d}
timeout 30

Windows Boot Loader
-------------------
identifier {b376ff9a-155a-11ed-ab3e-e338aefb2ad9}
device partition=C:
path \Windows\system32\winload.efi
description Windows 10
locale en-US
inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7}
recoverysequence {b376ff9b-155a-11ed-ab3e-e338aefb2ad9}
displaymessageoverride Recovery
recoveryenabled Yes
testsigning Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice partition=C:
systemroot \Windows
resumeobject {b376ff99-155a-11ed-ab3e-e338aefb2ad9}
nx OptIn
bootmenupolicy Legacy
hypervisorlaunchtype Off

 

[mqudsi]

You can try using the reinstall bootloader feature in EasyBCD to see if that takes care of the problem.
EasyRE should definitely be able to work as well - this is its bread and butter.