Booting Windows 10 will not load

I recently purchased a new Sanyo SSD 850 EVO 500GB and cloned over my smaller SSD for more space.
I am running 3 disks the 850 EVO, a WDC WD5000 and a WD1600. Windows 7 is on the Sanyo 850 EVO,
Windows 7 is on the WD5000 and Windows 10 is on the WD1600. I am unable to get the Windows 10
to load at boot. I have EasyBCD 2.3 and it's last in sequence. I have run Spotmau 2012 Golden Edition with
bootable CD and gone through the options including rewriting the MBR. At first Windows 10 gave me
some options to repair the drive but now it won't even load up and I get the message Windows\Sys32\Winload.exe
is either missing or corrupt. Any help would be appreciated?


Mostly Harmless
Staff member
Sounds like SpotMau (which doesn't handle bootloaders right and we strongly advise against using) reconfigured the entry incorrectly.

Use EasyBCD to delete the old Windows 10 entry and add a new one. Make sure you're on version 2.3