Crash on Win7RC x86-64

#1
Hi:

I am running EasyBCD 2.0.0.63.

I had a system booting fine with XP, Win 7 beta, and Ubuntu 9.04.

I then installed Win 7 RC. I can no longer boot XP or Ubuntu.

EasyBCD hangs when I try to install a new Linux entry. When I click the down arrow next to Device: I get the following in the event log:

The program EasyBCD.exe version 2.0.0.63 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: f18
Start Time: 01ca061dd5f794a0
Termination Time: 2
Application Path: C:\Program Files (x86)\NeoSmart Technologies\EasyBCD\EasyBCD.exe
Report Id: fd932291-7213-11de-a0be-001e8c016346

Thanks,

Tim

PS: I have five SATA drives in the system. For some reason Win 7 always chkdsk's one of the volumes. The drive is identified as NTFS during chkdsk but is always mounted as raw. I assume this isn't related but thought I'd mention it just in case.
 

JustinW

Super Moderator
Staff member
#2
The raw volume is likely your linux install. You should install the RC over the beta at this point. Your existing entries should re-main intact but if not or not working re-add them.