problems with dual boot Windows 7 pro and Linux

N

nullspace

New Member
I'm running Windows 7 pro on an ssd and trying to run Linux off the end of the 2nd hdd. This is what EasyBCD came up with:
There are a total of 5 entries listed in the bootloader.


Default: Windows 7
Timeout: 30 seconds
EasyBCD Boot Device: C:\


Entry #1
Name: CD/DVD Drive
BCD ID: {577a126b-a0db-11e3-b9b2-d7cc16b17139}
Device: Unknown
Bootloader Path:


Entry #2
Name: Hard Drive
BCD ID: {577a126c-a0db-11e3-b9b2-d7cc16b17139}
Device: Unknown
Bootloader Path:


Entry #3
Name: Windows 7
BCD ID: {current}
Drive: C:\
Bootloader Path: \Windows\system32\winload.efi


Entry #4
Name: Kali
BCD ID: {577a1277-a0db-11e3-b9b2-d7cc16b17139}
Drive: C:\
Bootloader Path: \NST\AutoNeoGrub0.mbr

When trying to boot Kali it won't boot. I get something like

File not found or corrupted: \NST\AutoNeoGrub0.mbr
I checked in windows and the file is there so I'm not sure what I'm missing. I had Linux put Grub on the Linux partition since that's what EasyBCD said to do and I couldn't get Linux to install grub on the MBR. Any suggestions?
 
Back
Top