Setting up the AutoNeoGrub0.mbr on a portable usb stick

M

Michael001

New Member
Default: Manjaro
Timeout: 10 seconds
Boot Drive: G:\

Entry #1
Name: Windows 7 Home Premium (recovered)
BCD ID: {current}
Drive: C:\
Bootloader Path: \Windows\system32\winload.exe

Entry #2
Name: Manjaro
BCD ID: {default}
Drive: C:\
Bootloader Path: \NST\AutoNeoGrub0.mbr

Hi,

How do I install the AutoNeoGrub0.mbr on a portable usb stick?
I've been trying, so far I've installed the NeoGrub.mbr and the nst_linux.mbr but they don't load Manjaro. What setting do I have to select to setup the AutoNeoGrub0.mbr on the portable usb stick? I want to set it up like my system drive is. I don't remember what settings I clicked on to setup the AutoNeoGrub0.mbr on my system. The AutoNeoGrub0.mbr is the only one that will load Manjaro. I had it setup on the portable stick before and it was working. Great program! Many thanks!
 
Hello!
To set up AutoNeoGrub0.mbr on a portable USB, use EasyBCD to install a BCD store directly onto the USB drive, then add a new NeoGrub entry with the boot drive set to the USB. This creates the AutoNeoGrub0.mbr and NST folder on the stick, replicating your system setup. Finally, configure the menu.lst file with Manjaro’s kernel and initrd paths so the USB can boot Manjaro correctly.
 
Back
Top