Tweakzz
Member
Hi all,
Have been having this very frustrating issue.
My EasyBCD 2.2 newly created or renamed menu entries DO NOT SHOW UP.
I put the USB back into the "program" PC and there they are????
But in the other "test" or "boot" PC it won't show the entries - usually some older or previous or original entry.
Main programming PC is a Asus Z77 i Deluxe ITX MoBo
Using Windows PC (Win 8 x64..but i recall it did the same on Win 7 x64)
Easy BCD 2,2 Comm Edition
Making a multi-boot USB (H) - tried USB 2 and 3 ports, and later on a hub just to be sure. Same on any/all.
So i browse to the H\boot\BCD and open that.
Create my menu's and then under Edit Boot Menu" and also "advanced setting" - i click SAVE in both, back n forth to make sure.
BUT - when i boot my other TEST PC with USB "H" - i see the old menu?????
And many times its also corrupt...
If i plug H back into the main programming PC - EasyBCD shows my latest entries.
Unplug it again and no luck...well, if i do it enough times i am sometimes lucky - but that is too hit and miss.
Another thing i noticed today and yesterday is some entries seem corrupt!!??
First two or three lines read ok - then strange characters appear....
I have tried different USB port
I have bought 4 different brands (2 each) of USB to try. Most USB 3 but i use USB 2 occ. to see if that makes any difference -(none s far)
My USB are mostly 32 or 64GB - but even on 8GB the menu error also appears - so no matter 1, 2, 4, 8, 32 , 64GB USB - any brand , all give errors
Ran chkdsk on main PC and on USB's. (no errors found!!!!)
Defragged all i could.
------------------------------------------------------
Any ideas anyone? This is holding me up enormously!
FYI - i tried using BCD onboard boot and BCD maker - no boot!!
So i used Microsofts USB ISO to Flash tool - using Win 8 x64 ISO - when finished it is H drive - then i simply edited the /boot/bcd store.
Later i make a root folder called ISO - in that are the Minitool partition Magic, macrium and win 8 install ISO's.
I have had them all work - then to try adding partition 2 with linux - but i cannot get that far with this menu issue.
Is there another way to make the USB bootable and yet maintain Win 8 install capability? (in case its my method??)
---------------------------------------
thanks in advance
Have been having this very frustrating issue.
My EasyBCD 2.2 newly created or renamed menu entries DO NOT SHOW UP.
I put the USB back into the "program" PC and there they are????
But in the other "test" or "boot" PC it won't show the entries - usually some older or previous or original entry.
Main programming PC is a Asus Z77 i Deluxe ITX MoBo
Using Windows PC (Win 8 x64..but i recall it did the same on Win 7 x64)
Easy BCD 2,2 Comm Edition
Making a multi-boot USB (H) - tried USB 2 and 3 ports, and later on a hub just to be sure. Same on any/all.
So i browse to the H\boot\BCD and open that.
Create my menu's and then under Edit Boot Menu" and also "advanced setting" - i click SAVE in both, back n forth to make sure.
BUT - when i boot my other TEST PC with USB "H" - i see the old menu?????
And many times its also corrupt...
If i plug H back into the main programming PC - EasyBCD shows my latest entries.
Unplug it again and no luck...well, if i do it enough times i am sometimes lucky - but that is too hit and miss.
Another thing i noticed today and yesterday is some entries seem corrupt!!??
First two or three lines read ok - then strange characters appear....
I have tried different USB port
I have bought 4 different brands (2 each) of USB to try. Most USB 3 but i use USB 2 occ. to see if that makes any difference -(none s far)
My USB are mostly 32 or 64GB - but even on 8GB the menu error also appears - so no matter 1, 2, 4, 8, 32 , 64GB USB - any brand , all give errors
Ran chkdsk on main PC and on USB's. (no errors found!!!!)
Defragged all i could.
------------------------------------------------------
Any ideas anyone? This is holding me up enormously!
FYI - i tried using BCD onboard boot and BCD maker - no boot!!
So i used Microsofts USB ISO to Flash tool - using Win 8 x64 ISO - when finished it is H drive - then i simply edited the /boot/bcd store.
Later i make a root folder called ISO - in that are the Minitool partition Magic, macrium and win 8 install ISO's.
I have had them all work - then to try adding partition 2 with linux - but i cannot get that far with this menu issue.
Is there another way to make the USB bootable and yet maintain Win 8 install capability? (in case its my method??)
---------------------------------------
thanks in advance
Last edited: