My computer configuration has two physical disk drives (C & D).
Disk C contains Win 7 Pro and disk D contains Win XP.
I would like to permanently remove disk D WITHOUT altering it and single boot Win 7 from disk C.
When I physically remove disk D, my computer cannot boot from disk C even though it is listed as a boot device in my BIOS.
How do I use EasyBCD to allow me to boot Win 7 from disk C?
EasyBCD 2.3 displays the following configuration information:
Default: Windows 7
Timeout: 30 seconds
Boot Drive: D:\
Entry #1
Name: Earlier Version of Windows
BCD ID: {ntldr}
Drive: D:\
Bootloader Path: \ntldr
Entry #2
Name: Windows 7
BCD ID: {current}
Drive: C:\
Bootloader Path: \Windows\system32\winload.exe
Thank you in advance for any help you can provide.
Disk C contains Win 7 Pro and disk D contains Win XP.
I would like to permanently remove disk D WITHOUT altering it and single boot Win 7 from disk C.
When I physically remove disk D, my computer cannot boot from disk C even though it is listed as a boot device in my BIOS.
How do I use EasyBCD to allow me to boot Win 7 from disk C?
EasyBCD 2.3 displays the following configuration information:
Default: Windows 7
Timeout: 30 seconds
Boot Drive: D:\
Entry #1
Name: Earlier Version of Windows
BCD ID: {ntldr}
Drive: D:\
Bootloader Path: \ntldr
Entry #2
Name: Windows 7
BCD ID: {current}
Drive: C:\
Bootloader Path: \Windows\system32\winload.exe
Thank you in advance for any help you can provide.