liquidfusion
Member
XP Pro / SP3 (32 bit) installed (drive 0 | partition 2) on one of two IDE / Pata Hard Drives attached to a SCSI F6 PCI Card. Disconnected power to drives on this PCI card before installing Win 7 Pro (32bit) to a partition on separate third Hard Drive attached to internal Sata 1 motherboard port. Reason: Win 7 wasn't letting me install on the Sata drive: "Win 7 unable to create a new system partition." No hard drives are attached to the primary IDE. DVD/CD are attached to secondary IDE.
Shutoff PC. Added power back to drives attached to PCI card. Booting into the PC, I get XP Pro / SP3. No OS menu.
Bios Sequence: CDRom | HDD 0 | SCSI | Enable Other. How do I setup BCD? Thanks.
Built PC: AMD | A7N8X Deluxe Rev 2.0 | 2 GB Ram
Shutoff PC. Added power back to drives attached to PCI card. Booting into the PC, I get XP Pro / SP3. No OS menu.
Bios Sequence: CDRom | HDD 0 | SCSI | Enable Other. How do I setup BCD? Thanks.
Built PC: AMD | A7N8X Deluxe Rev 2.0 | 2 GB Ram
Last edited: