How-To: Hide Vista Partition from XP with NeoGrub!

Editor’s note: This article was modified on Jan. 31, 2009 to reflect the usage of Vista Hide ‘n Seek, NeoSmart Technologies’ new, free product for automating the NeoGrub hiding procedure.

One of the biggest problems that faces dual-booters is data corruption on many different fronts. While using proper dual-boot techniques and going by the book can avoid most forms of data corruption, there are some things that you can’t just work around, especially if it’s considered a “feature” by Microsoft… One such “feature” is that those dual-booting Windows XP and Windows Vista will find that every time they boot into XP, they’ll lose all their Vista system restore points – because XP “intelligently” detects them as being corrupt XP system restore profiles. So much for painless dual-booting. Even Vista’s “Complete Backup” feature is decimated by the very existence of XP on the same computer – and having them on separate hard drives doesn’t help!

Unfortunately, there is no guaranteed solution to this. Microsoft acknowledges the issue – and provides a possible fix in the form of a registry patch for XP ( http://support.microsoft.com/kb/926185 ) though this isn’t something that works for everybody. The advice has been either not to dual-boot at all, run XP in a virtual machine, or else encrypt the Vista hard drive – a feature that has more bugs than the rest of Vista put together. But don’t worry, we have a couple of (free and easy!) solutions for you!

Method 1: Vista Hide ‘n Seek

The NeoSmart preferred solution, which supercedes the use of NeoGrub (see belwo) for this purpose is our own program, “Vista Hide ‘n Seek ” (HnS). This will not only protect your Vista restore points from corruption by XP, it will automate the whole process without you needing to get involved in the messy business of translating Windows disk and partition information into Linux speak.

Should you have a Vista and an XP system installed on their own disks, each blissfully unaware as yet of the existence of the other, and you are about to embark upon dual-booting them, and have come here because you wisely want to protect Vista from XP from the very start, look no further. HnS will not only do its stated job of hiding Vista from XP, it will automate the entire dual boot process for you, and all with just a couple of clicks in a friendly Graphical User Interface.

All you are required to do, is indentify, in an Explorer-like window, which partition(s) contain Vista restore folders to be protected and which partition(s) have a bootable XP installation. This is done with a simple point and click, and that’s about it. You have your dual boot set up, with Vista restore points protected from XP. Provided you have only one Vista system, this solution will give you a neat, single boot menu even if you have several XP installations.

(Remember in each OS before you start, to turn off system restore on all partitions except the OS itself and any partition on which you have installed 3rd party software for that OS. These are the only drives that need to be monitored by system restore, and in the case of Vista, these are the ones you need to mark as Vista to HnS, so that they are hidden from XP. It follows therefore that you cannot install 3rd party software on a disk shared between Vista and XP. You can however share data between them on a common partition because system restore will be turned off on this drive and it will therefore contain no system restore folder to be corrupted by XP).

Method 2: NeoGrub

If you are still determined to use NeoGrub to do this, despite the advantages of HnS, and you are prepared to live with the fact that your dual-boot will have two (or three) menus, here’s how to do it.

  1. If you don’t already have it, download and install EasyBCD.
  2. Run EasyBCD and go to the “Add/Remove Entries” screen.
  3. Delete any and all “Windows XP” entries in the list you see. Simply select them, and press the delete button.
  4. Click the “NeoGrub” tab, and select “Install NeoGrub” from the screen.
  5. Once NeoGrub is installed, hit the “Configure NeoGrub” button.Notepad will open, and you’ll be presented with the NeoGrub configuration file, called “menu.lst” NeoGrub provides a bunch of very nifty options that will help us hide the Vista drive from Windows XP, in a very safe, simple, and straight-forward manner.

    Copy and paste this code over the existing menu.lst file. Replace everything:

NB: If you have multiple Vista partitions, you will need to duplicate the “hide” and “unhide” lines to point to the other Vista partitions as well in order to hide them too.

Read “Drive Letters and Numbers” to figure out which (hdx,y) sequence you need to use. Hard drive and partition counts start at 0. You can see a full list of drives and partitions by going to the “Linux/BSD” tab of the “Add/Remove Entries” section in EasyBCD.

Save it, and exit notepad.

Optional: Go to the “Configure Boot” screen and rename the entry from “NeoGrub Bootloader” to “XP” or another name of your choice.

Exit EasyBCD & reboot to test.

Now when you reboot your PC, the Vista BCD menu will give you two options: Windows Vista and Windows XP (or NeoGrub if you didn’t rename it). Selecting Windows Vista or allowing the boot to default will boot you right into Windows Vista, while choosing Windows XP will transfer control of the bootloader process to NeoGrub.

NeoGrub will display another boot menu with two options: Hide Vista – boot XP and Unhide Vista – Then boot it.

Selecting the first option will hide Vista’s drive and then call up NTLDR which will read the boot.ini menu. If you only have one XP installed, it will boot right into it . If you have multiple XP installations, you’ll be presented with a third menu of installations to boot to, all of which will no longer see the Vista drive.

Now here’s the tricky part. You’ve just been using XP, You’ve finished with XP. You want to go back to Vista. You boot the PC.

You cannot select Vista from the first menu. Vista is still hidden. You must select XP again from the first menu, but this time, you do not allow the second menu to take the default, you select the “Unhide Vista – then boot it” option. The system will reboot, but NeoGrub will unhide the Vista partition(s) first, and this time, you can select Vista from the first menu.

This technique works perfectly, but as you can see, is extremely clumsy in use, especially with two or more XPs. That was why HnS was developed. Why not do yourself a favour and use it instead.

Please do not under any circumstances post support requests in the comments below – they will go unanswered. If you have any questions or problems, post in the forums!

Special thanks to the Grub4Dos Project, without which none of this would have been possible.

Recovering Corrupted Downloads the Right Way

You don’t have an OC-48 or even T3 in your home. It takes you 24 hours+ to download the latest DVD image of Ubuntu or Windows Vista. Or maybe it “only” takes you 12 hours+. Either way, you’ve just finished your download to realize that its corrupt: the crc32 and md5 hashes just don’t add up. You burn it any way, only to find that it crashes randomly at some point of the install – or if you’re really unlucky, once it boots and seems to be working fine.

It’ll take you an entire extra day (and night) to re-download that copy.. and this time you’ll want to make doubly-sure you don’t disconnect in the middle or hit the power-switch by accident. Then you stumble upon this article, and realize you’ve been going about this the wrong way. Because the answer isn’t to download it again, but to only download the parts that are corrupt, the parts that you need – and nothing more.

Continue reading

Extend your Vista "Trial" to a 120 Days

Despite posts, warnings, pages, and articles to the contrary all over the web, Windows Vista does have a trial version. It may be hard to get your hands on a legal copy of the Vista DVD without resorting to illegal means, but once you do, you can legally use it for 120 days – fully sanctioned and supported by Microsoft itself.

Just boot from the DVD, install without using a product key, and start using Windows. When your 30 day “grace period” prior to activation runs out, open up a command wind (Start -> Run -> cmd.exe) and type this in:

slmgr -rearm Continue reading